Terrence focuses on the development and production of various types of gas gathering and transportation special integrated equipment
Measurement system
Product overview The metering system is a skid-mounted metering system (device) used as a trade handover in the sub-delivery station of a long distance natural gas pipeline. It integrates the functions of filtration, metering, gas component analysis, flow comparison, online calibration, system venting, automatic switching and so on. According to different working conditions and requirements, it can be divided into turbine metering system, ultrasonic metering system, mass metering system, hole plate metering system, etc. The metering system is generally composed of several subsystems, such as filtration system, metering system, flow comparison system, gas chromatographic analysis system, online calibration system, blow-off system and gas leakage alarm system. A straight pipe section that meets the requirements and a flow computer are used to compensate the temperature and pressure of the gas for flow calculation. The gas component signal is detected by an…
Product overview Pressure regulating measuring station: remove liquid hydrocarbon, moisture, sand and pipe scale Install before the gas storage tank to prevent particles and moisture from entering It is installed at the suction end of the compressor to prevent particles and moisture in the air stream from wearing the equipment Remove particulate matter and moisture from gas handling equipment to prevent contamination of process equipment and catalyst poisoning Installed downstream of mixers such as amines, glycols, potassium and absorption oils for recycling to reduce dissolution losses Technical characteristics
Product overview The gas turbine fuel gas pressure regulating system is a skid-mounted system for gas turbine gas supply, which integrates the functions of filtration, heating, pressure regulating, metering, venting, releasing, leakage alarm, automatic switching and so on. The gas turbine fuel gas pressure regulation system is generally composed of several subsystems, such as filtration heating system, metering system, pressure regulation system, vent system, gas leakage alarm system, etc. The metering system is equipped with a flow computer to calculate the gas flow through temperature and pressure compensation. The pressure regulating system has the configuration characteristics of "pressure control system", and adopts the configuration mode of "safety emergency cut-off valve + monitoring regulator + working regulator". In principle, the blow-off system adopts centralized blow-off; The gas leakage alarm system can be interlinked with the main valve and the blow-off system.…
Product overview The online natural gas component analysis system, also known as the "analysis hut", is designed according to the needs of users and can combine a variety of online analysis instruments (such as gas chromatography analyzer, H2S analyzer, hydrocarbon dew point analyzer and water dew point analyzer, etc.), sample gas treatment system, sample recovery system, environmental protection system, etc. Thus, the on-line analysis instrument can operate in a suitable environment. The basic configuration of natural gas component analysis system includes analysis instruments, such as: gas chromatography analyzer, hydrogen sulfide analyzer and water dew point analyzer, sample gas treatment system, carrier gas, standard gas, explosion-proof lighting and explosion-proof switch, explosion-proof exhaust fan, temperature alarm, combustible gas alarm, explosion-proof air conditioning, stainless steel hut, etc. Product characteristics ◆ Integrated structure design, small footprint, easy installation and maintenance, high system reliability, flexible…
Product overview In pressure vessels, pressure pipelines and other supporting equipment, quick opening blind plate is a common quick opening or closing device. In the natural gas industry, the quick-opening blind plate is often used in equipment that needs to be opened and closed at irregular intervals, such as gas filters, gas filter separators, and receiving cylinder devices. Technical characteristics
Gas turbine power generation supporting natural gas station equipment
Product overview All gas turbine power plants using natural gas as raw materials need a complete set of natural gas supply system equipment to ensure efficient and safe operation of gas turbines. The system usually includes an inlet unit, a metering unit, a gas pretreatment unit, a pressure regulation (pressurization or decompression) unit, a temperature regulation (heating or cooling) unit, an electrical and control unit, and auxiliary systems such as discharge, blowdown and safety monitoring. Tris gas turbine power generation supporting natural gas station equipment conforms to the requirements of the national "Gas power station gas system safety management regulations", and in line with relevant international and domestic standards, widely used in supporting various types of gas power stations. Product characteristics ◆ Inlet unit: usually composed of insulated joints and emergency cut-off valve (ESD), insulated joints play an isolating potential…
Product overview A heat exchange device used to transfer part of the heat from a hot fluid to a cold fluid so that the fluid temperature meets the requirements of the process flow. The company's products according to the product use of different occasions, design a variety of structures of heat exchangers. Air temperature heat exchangers are often used for liquid liquefied petroleum gas and LNG vaporization into gas. The heat exchange of the gas in the pressure regulator makes the natural gas reach the required temperature, and prevents the decrease of the gas temperature caused by the gas pressure drop from affecting the normal operation of the downstream equipment. Heat exchangers are usually suitable for the following media: air, hot water, steam, thermal oil or electric heating, and can also be specially designed according to user requirements.
Product overview The integrated skid-mounted sub-transmission station equipment is a highly integrated skid-mounted system used to distribute natural gas on a long distance natural gas transmission pipeline, the downstream of which is one or more city gate stations; It is a highly integrated skid-mounted system that integrates the functions of natural gas clean filtration, pressure regulation, metering, temperature control, gas leak alarm and data acquisition and monitoring. Its task is to clean and filter the natural gas in the pipeline network, as well as regulate and control the pressure, temperature and flow rate, and provide stable and clean fuel for downstream gas equipment. Product characteristics ◆ Customized design according to customer requirements, highly integrated; ◆ Large circulation capacity, low pressure loss, low noise; ◆ It can integrate station control in the station, and configure function modules such as remote cutting,…
Product overview RCS8000 remote pressure/flow control system is based on the self-operated regulator with a controller, using a multistage controller, and adding the pressure and flow detection device in and out of the station. Its function is to achieve remote pressure, flow control and other functions, to achieve remote online monitoring and management of transmission and distribution system. At the same time, the RCS8000 system can also realize the control and management of automatic valves such as electric regulating valves. Product characteristics ◆ Flexible and diverse control functions ◆ Bus control, online monitoring function ◆ Can be operated remotely and visualized ◆ Strong scalability ◆ Can be integrated with the whole station control system ◆ High reliability and precision ◆ Easy to maintain
Product overview The pressure control system is a gas pressure regulating device that integrates various functional components such as pressure regulating, current limiting and automatic control. It is specially designed for gas transmission stations, urban sub-transmission stations, storage and distribution stations, power plant gas turbine supply and other occasions. Also known as the "pressure train". Pressure control system is generally composed of "safety emergency cut off valve + monitoring pressure regulator + working pressure regulator" these main equipment in sequence from upstream to downstream gas regulator device, and supporting the corresponding instruments and meters. At the same time, the main equipment can be configured in a variety of ways such as self-operated, electric or pneumatic according to different user requirements and process requirements. The whole system adopts modular and skid-mounted supply, and the main equipment and related instruments in the…
Product overview The receiving and serving barrel of the pig is an important process device of the pipe cleaning equipment, which is installed at both ends of the pipeline for launching and receiving the pig. It is mainly composed of quick-opening blind plate, cylinder, reducing tube, saddle support and other parts. Technical characteristics
Product overview The receiving and serving barrel of the pig is an important process device of the pipe cleaning equipment, which is installed at both ends of the pipeline for launching and receiving the pig. It is mainly composed of quick-opening blind plate, cylinder, reducing tube, saddle support and other parts. Technical characteristics
Terrence always prioritizes the layout of our service network to improve the overall quality of service. Our products are guaranteed to provide full life cycle service.
24-hour customer service hotline: 400-161-0500
Add: No.22 Yanhe Middle Road, Xinbei District, Changzhou City, Jiangsu Province
